ERP project was completed for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore and M/s. Aveon Infotech, Coimbatore.
Automatic Bill Generation was developed for the company M/s. Mackryl Textiles, Tirupur and M/s. KM Knit Wear, Tirupur.
ERP software was developed for M/s. Gowra Aerospace Technologies Pvt. Ltd., Secunderabad and Coimbatore, M/s. Potteries & Refractories, Coimbatore.
ERP Software was developed for the company M/s. Surfine Tools, Coimbatore and M/s. Super Pressings, Kerala.
Civil Engineering
Bricks and concrete blocks were manufactured by replacing natural fine aggregate with waste foundry sand collected form M/s. Barani Ferrocast Pvt. Ltd., Coimbatore. Which were used for the construction of JSREC compound wall.
A 2000 ton machine foundation was designed for M/s. Mahendra Aerospace, Bangalore.
Design and Construction of multiple Industrial buildings for M/s. Barani Ferrocast Pvt. Ltd., and M/s. JVN Pvt. Ltd., Coimbatore.
A landslide protection measure was designed and implemented by using root reinforcement for improving the soil strength, thus preventing landslides in the Nilgiris district of Tamil Nadu.
Electronics and Communication Engineering
Design of Automatic 70T oil Quenching Hydraulic machine was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore.
Implementation of traffic engineering in MPLS network by creating TE tunnels was completed for Bharat Sanchar Nigam Limited (BSNL), Chennai.
Filter press using PLC automation was done for M/s. PR Automation India Pvt. Ltd., Coimbatore.
Design of transfer unit hydraulic machine was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore.
70T riveting press was done for M/s. Barani Hydraulics India Pvt. Ltd, Coimbatore.
Electrical and Electronics Engineering
Implementation of control panel using PLC for 750 ton expander hydraulic press was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore in the year of March 2019.
Muliti purpose safety device for women and child using IoT were done for BSNL, Chennai, March 2019.
Transformer status monitoring and diagnosis using IoT was done for BSNL, Chennai, March 2019.
Implementation of single phase induction motor for two stage centrifugal jet pump was done for M/s. Bindhu Engineering Industry, Coimbatore, April 2019.
Battery Modeling and Internal Circuit Analysis of Lead Acid Battery were done for M/s. Ampere Vehicles Pvt. Ltd., Coimbatore, March 2018.
Integration of linear displacement encounter and servo motor for 180 Ton Power Compacting Press was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2018.
Implementations of PLC Control panel for 500Ton Hydraulic Deep drawing press were done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2018.
Design and implementation of PLC based Control panel for hydraulic assembly press was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2017.
Implementations of PLC Control panel for 500Ton Hydraulic Deep drawing press were done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2017.
Implementation of PLC Control panel for 100Ton valve hole piercing hydraulic press was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore in the year of March 2016.
Implementation of PLC Control panel for 750Ton Expender hydraulic press was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2016.
Design Manufacture and control f 200Ton crimper press machine using PLC control panel was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2016.
Development of control panel with PLC based operation for 800Ton deep drawing press was done for M/s. Barani Hydraulics India Pvt. Ltd., Coimbatore, March 2014.
Mechanical Engineering
Productivity improvement in winding subcell at kcc top ring through value stream mapping done for M/s. IP Rings Pvt. Ltd., Chennai in the year March 2020.
Design and Analysis of Material Handling Systems in Foundry done for M/s. Barani Ferrocast Pvt. Ltd., Coimbatore in the year March 2020.
Investigation of Mechanical Properties of Polypropylene Sheet and Natural Composite Sheet done for M/s. Ace Tech Pvt. Ltd., Coimbatore in the year March 2020.
Design and Assembly of 100 Ton Hydraulic Cure Press done for M/s. Barani Ferrocast Pvt. Ltd., Coimbatore in the year March 2019.
Productivity Improvement in a Disc Pad Manufacturing Industry by using Man Machine Chart done for M/s. Rane Brake Lining Ltd., Trichy in the year March 2019.
Yield Improvement of Gating System in Iron Casting done for M/s. Barani Ferrocast Pvt. Ltd., Coimbatore in the year March 2019.
Design and Analysis of 1000T Hydralic Press done for M/s. Barani Ferrocast Pvt. ltd., Coimbatore in the year April 2018.
Automatic Bending Machine Using Pneumatic Cylinder done for M/s. Surfine Tools, Coimbatore in the year April 2018.
Study of Production Improvent in Plastic Industry done for M/s. Eco Polytech Pvt. Ltd., Chennai in the year April 2018.
Design and Analysis of Gear System In 400T Hydraulic Cure Press done for M/s. Barani Ferrocast Pvt. Ltd., Coimbatore in the year April 2017.
Two Daylight Hydraulic Cure Press done for M/s. Barani Ferrocast Pvt. Ltd., Coimbatore in the year April 2017.
Design and Fabrication of 70 Tons Break Pad Cure Press Machine done for M/s. Barani Ferrocast Pvt. Ltd., Coimbatore in the year April 2017.
MBA
A Study on Employee Job Satisfaction at Chettinad Cement, Coimbatore.
A Study on Employees performance Appraisal in Silver Cloud Estate TEA Factory at Gudalur.
A Study on Financial Performance Analysis with Reference to Podaran Foods India Pvt. Ltd., Kangeyam.
